Parent Unit Power Supply - Motorola MBP43S User Manual

3. Gently tighten the screw in a clockwise direction using a small cross head
or flat end screwdriver.
2.3

Parent Unit Power Supply

IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is
recommended. This will allow the unit to operate on battery in the event of a
power failure.
1. Connect the small plug of the power adapter to the Parent Unit and the
other end to the mains power. Only use the supplied power adapter (5V
DC / 600mA) with the Micro USB plug.
2. Press and hold the
ON the Parent Unit.
3. Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the video captured by the Baby Unit.
4. If there is no connection or you are out of range, the video display will be
replaced by a
Parent Unit closer to the Baby Unit until the link is re-established.
10
Micro USB Socket
Micro USB Plug
P
POWER ON/OFF button for 1 second to switch
symbol and the unit will beep every 5 seconds. Move the
Small cross head or flat
end screwdriver
Getting Started