Slopes; Height Of Cut - Hayter Harrier 56 BBC Owner's Handbook Manual

OPERATING
THE MOWER

Slopes

To prevent engine damage do not use the mower on slopes greater
than 20 degrees.
B

Height of Cut

To adjust the height of cut: Grip the lever and pull sideways to
disengage it from the locking notch, then push forwards to lower or
pull backwards to raise the height of cut. Finally release the lever at
the required position and ensure it locks firmly into one of the eight
setting notches.
Always select a height of cut to suit operating conditions. Aim to
prevent engine overloading and blockages by avoiding low cuts in
305113
long grass conditions. Be prepared to make two cuts when the grass is
CS284
long.
1.17