Slopes
To prevent engine damage do not use the mower on
slopes greater than 20 degrees.
Height Of Cut
Grip the lever and pull side-
ways to disengage it from the locking notch, then push
forwards to lower or pull backwards to raise the height
of cut. Finally release the lever at the required position
notches.
Always select a height of cut to suit operating conditions.
Aim to prevent engine overloading and blockages by
avoiding low cuts in long grass conditions. Be prepared
to make two cuts when the grass is long.
Before Mowing
+
-
20
Grassbag
To empty the grassbag, pour out the grass clippings and
shake the grassbag vigorously to clean the airways. Good
grassbag. When collecting grass clippings it is important
that the grassbag is emptied regularly to prevent block-
ages and engine overloading.
Collection Without Grassbag
Remove the grassbag and operate the mower with the
Heavy Growth
Areas of heavy growth should be mown without
mow the area without the grassbag at the maximum
height of cut setting. A llow the grass clippings to dry
out and then mow the area at the maximum height of cut
and mow the area again as necessary until the required
To prevent damage to your lawn do not remove more
than one third of grass height in one cut.
9