This chapter shows you how to set up a time range for time-oriented features on the Switch.
20.1 About Time Range
You can set a time range for time-oriented features such as Classifier ACL (Access Control List) rule
which categorizes data packets into different network traffic flow. The advantage of the time range
feature is that it allows you to schedule the active time of configurations. For example, see
21.2 on page 169
The time range can be configured in two ways - Absolute and Periodic. Absolute is a fixed time
range with a start and end time. Periodic is recurrence of a time range and doesn't have an end
time.
20.2 Time Range Setup
Click Advanced Application > Time Range in the navigation panel to display the screen as
shown.
Figure 117 Advanced Application > Time Range
C
to configure the classifier rule with time range.
XS1920 Series User's Guide
167
HAPTER
Time Range
2 0
Section