5.11. Firmware Update; Factory Reset; Functions Settings - Fly Sky FS-T6 Instruction Manual

Digital propotional radio control system
15.11. Firmware update
Prior activating this function, connect the USB cable
between the back interface of the transmitter and a PC
computer. A confirmation will be asked since all
functions will be halted. Turn off any receiver before
entering this mode. To exit this mode, simply turn off
then back on the transmitter.
15.12.

Factory reset

This function will restore the whole transmitter settings
to their factory default. All system and modes settings
will be lost. Since this function is destructive, a
confirmation will be asked.
16.

Functions settings

固件升级
先启动此功能，然后用USB线将发射机背后的接口与电
脑连接。 所有功能停止之后， 会有一个询问提示， 确认是
否执行该操作。进入此模式前，请关闭所有接收机。 如需退
出此模式， 直接关闭发射机。
出厂设置
此功能可恢复发射机全部设置到出厂默认值， 所有的系
统设置和功能设置数据将将被永久删除，并且无法恢复，因
此会有一个询问提示，再次确认是否执行该操作。
功能设置
FS-T6
16