Digital proportional radio control system
6.8 Sticks Mode
The system has 4 stick modes to change from, to change the mode touch M1, 2, 3 or 4 on the right hand
side of the screen. The currently selected mode is highlighted in black.
Mode 1
Left stick
•
Left/Right: Rudder
•
Up/Down: Elevator
Right stick
•
Left/Right: Aileron
•
Up/Down: Throttle
Mode 3
Left stick
•
Left/Right: Aileron
•
Up/Down: Elevator
Right stick
•
Left/Right: Rudder
•
Up/Down: Throttle
6.9 Factory Reset
This function resets all settings back to default. To reset the system touch "Factory Reset" in the main
menu then when prompted touch "Y" for yes.
Note: Once reset all user settings will be lost.
6.10 Firmware Update
To update the systems firmware:
1.
Download the latest firmware from www.flysky-cn.com.
2.
Open the firmware update on a computer and connect the system via usb cable.
3.
Select "Firmware Update" from the systems function menu. The system will show a prompt, "This will
enter firmware update mode and halt other functions" with an option to continue, select "Y". When in
update mode the screen will turn off.
4.
Once the system has been recognised by the computer select the update button at the bottom of the
firmware update software.
Once the system has been updated it will restart. Once the system has restarted it is safe to remove the
USB cable.
6.11 Receiver update
If no receiver is connected it will wait for the receiver to connect. Once a receiver is connected select yes
to update receiver. When the receiver is connected select "Y" to continue. After the update the receiver
will restart and connect.
18
Mode 2
Left stick
•
Left/Right: Rudder
•
Up/Down: Throttle
Right stick
•
Left/Right: Aileron
•
Up/Down: Elevator
Mode 4
Left stick
•
Left/Right: Aileron
•
Up/Down: Throttle
Right stick
•
Left/Right: Rudder
•
Up/Down: Elevator
FS-l6S