Windshield Installation; Wing Strut Attachment - THUNDER TIGER Piper J-3 Cub Assembly Manual

WINDSHIELD INSTALLATION

Cut the windshield along the molded cutting line using a pair of
scissors (Photo 94).
Photo 94
Using black and yellow paint, paint the windshield as shown
(Photo 95).
Photo 95
Attach the windshield to the fuselage. Hold the windshield in place
with masking tape. Apply R/C 56 glue along the area where the wind-
shield meets the fuselage. Allow to cure over night (Photo 96).
Photo 96

WING STRUT ATTACHMENT

Cut a notch in the wing strut at each end. Drill a 5/64" (2mm) hole
at the wing strut notch (Photo 97).
Photo 97
Secure the mounting plate as shown with a M3x5 wood screw
(Photo 98).
Photo 98
Refer to Photo 99. The top strut is for the right wing and the lower
strut is for the left wing.
Photo 99
20