HearthStone Tribute 8040 Owner's Manual page 26

The procedure for
replacement is as follows:
1. Remove the door by lifting it straight up off
the hinges with the hinge pins remaining in
the door.
2. Place the door face down on a flat, smooth
surface, other than the floor, with the handle
hanging over the edge.
3. Apply penetrating oil to the screws in the
glass retainer clips. Remove the screws to
separate the glass from the door.
Hearthstone Quality Home Heating Products, Inc. ®
glass and glass gasket 4. Carefully lift the damaged glass and/or old
gasket from the doorframe and discard.
5. Peel the paper backing from the tape
gasket. Apply the new gasket to the
doorframe as illustrated on page 17.
6. Place the gasketed glass onto the door.
Place a new clip and gasket square around
the glass and over the screw holes in the
clip.
7. Screw the glass retainer clips (6) back on
the door.
8. Install the door.
23 Tribute Model 8040