XYZ Printing da Vinci 1.0 Pro Quick Manual page 9

da Vinci 1.0 Pro
Other settings
WiFi Connection
The printer supports Wi-Fi connection printing.
Install "XYZware Pro", and activate Wi-Fi setting of the printer in accordance with
the following instruction to switch the printer to wireless control mode, such that the
print file may be subsequently transferred wirelessly.
● Preparation Prior to Setting
1.
The network print function is provided mainly for Intranet application. Please set the printer and the computer
in the same domain, that is, link them to the same wireless base station (Access Point)
2. Before linking the printer, settings would be adjusted for the connected wireless base station. For detailed set-
ting way, please refer to the operation instruction of the product or original vendor relevant information.
Channel Width may be set to
3.
ing instruction of wireless base station to understand adjustment way
4. Please keep the wireless network function in the on state
5. The machine supports the following link security modes. Public key information would be requested to enter in
setting printer connection
◆ ◆
WEP WPA
● Wi-Fi Settings
1
Please use a USB cable to link the computer and
the printer, and open XYZware Pro.
Click the "Printer Monitoring" function icon
2
on the lower right corner on the screen, open
"Printer Monitoring" window, click "My Printer"
> "Scan" to enter the page for printer search,
and click "Wireless Network Settings" to enter
the page for wireless print settings.
2-2
2-4
P 9
20 MHz for use of wireless print function. Please refer to original vendor operat-
◆
WPA2
(This image is for reference only)
2-1
2-3
2-5
HD23F1AW0Z3