Decommissioning; Switching Off The Pos System; Disconnect The Pos System From The Power Supply - QUORION QMP 50 Series Operating Manual

Decommissioning

8 Decommissioning
8.1

Switching off the POS System

Requirements:
 All direct bookings are finished.
Procedure:
Switch the POS system off by pressing

and holding the power button (A) for 3
seconds.
 The POS system will shut down after a few seconds.
8.2

Disconnect the POS System from the Power Supply

WARNING
Risk of death due to electric current
Improper decommissioning and use of the POS system can result in electric shocks. People could be
seriously or fatally injured.
 Never connect or disconnect the power plug with wet hands.
NOTICE
Risk of damage due to improper decommissioning and use
The POS system and external devices can be damaged by improper use.
 When disconnecting the power cable, hold it firmly at the connector area. Do not tug on the cable
itself.
 Switch off the device before disconnecting any peripheral devices.
Procedure:
1. Disconnect the POS system from the electrical outlet.
2. Disconnect the power adapter from the POS system.
3. Disconnect the power cord from the power adapter.
 The POS system is properly disconnected from the power supply.
22 QMP 50