Omnitronic NKB SERIES User Manual page 24

11 Microphone input
XLR and 6.3 jack input for connecting a microphone.
Model NKB-208A only have a 6.3 mm jack input.
12
Line input
XLR and RCA input for connecting audio units with line
level output (e.g. mixer, CD player).
Models NKB-208A/AP have 6.3 mm jack and RCA
inputs.
13
Feed-through output
Line output (XLR and 6.3 mm jack), connected in parallel
to line input, for feeding the input signal to a unit with line
input, e.g. another active speaker system.
Models NKB-208A/AP and NKB-210A/AP only have a
6.3 mm jack input each.
14 Level control the microphone input
15 Level control the line input
16 Level control the overall volume
17 Tone controls
2-way tone control for the mixed signal: TREBLE = high
frequencies, BASS = low frequencies.
18 Power indicator
19 Clip indication
20 Power switch
Turns power to the speaker system on and off.
21 Power input and fuse holder
• Plug in the supplied power cable here.
• Only replace the fuse when the device is disconnected
from mains. Only use fuses of the same rating and
power. The correct fuse value is specified on the rear
panel.
Models NKB-210A/AP: The fuse holder can be
switched to one of two positions, i.e. 230 V and 115 V.
The default setting is 230 V.
24/32 00058980.DOC, Version 1.1