Lpar Validation Tool - Creating A New Partition; Lpar Validation Tool - System Selection Dialog - IBM p5 590 System Handbook

Figure 5-1 LPAR Validation Tool - creating a new partition
Upon opening up a new configuration, the resulting dialog (Figure 5-2) provides
places to select the basic attributes of the machine you plan to validate.
Figure 5-2 LPAR Validation Tool - System Selection dialog
Hold your cursor over a field, and additional information is provided, as shown in
(Figure 5-3 on page 115).
IBM Eserver p5 590 and 595 System Handbook
114