Cancel A Card; Cancel A Card By Reading It; Cancel A Card By Entering Its Number - Siemens RF30-EM Configuration Manual

Stand-alone mode
11.2

Cancel a card

11.2.1 Cancel a card by reading it

11.2.2 Cancel a card by entering its number

24
Siemens AG
NOTE
If you have entered the wrong Axx command (e g in step 3 below) you can abort the command and
exit to Administrator mode by pressing A again.
1. Press B .

2. Enter the 6-digit Administrator code. See section 8 Change Administrator
code.

3. Press A14 .
 The buzzer sounds a confirm tune.

4. Present the card at the RF30-EM.
 The buzzer sounds a confirm tune.

5. Cancel the next card, by presenting them at the RF30-EM.
NOTE
If you have entered the wrong Axx command (e g in step 3 below) you can abort the command and
exit to Administrator mode by pressing A again.
1. Press B .

2. Enter the 6-digit Administrator code. See section 8 Change Administrator
code.

3. Press A16 .
 The buzzer sounds a confirm tune.

4. Enter the card number on the keypad.
 The buzzer sounds a confirm tune.

5. Cancel the next card, by entering the card number at the keypad.
04.2010