Set Up A Second Receiver; Set Up A Second System; Set Up The Channels To Avoid Intermodulation - PROEL RM3000TR User Manual

SETTING UP A SECOND RECEIVER
After you have set the first receiver and transmitter, leaving ON the transmitter repeat the operation
for the second receiver:
SETTING UP A SECOND SYSTEM
If you need to use a second SYSTEM (receiver and transmitter) in the same application, you have to
set a transmission channel different from that used in the first system. The channel used for the
second system must NOT be adjacent to the channel used for the first one, otherwise the two
systems will not work.
SETTING UP OTHER CHANNELS
If you are using two or more wireless systems in the same frequency range (863 – 865 MHz), follow
this simple method in order to check if there is any interference between them.
x Turn on all the transmitters and send a different signal thru each of them.
x Check the receivers one at a time and verify if they work properly and if each of them
receives the right signal without interferences from other transmitters.
11