Operation; A) Receiver Rmw8; B) Transmitter Whl/Wml - PROEL RMW8 Series Manual

RMW8

4. Operation

a) Receiver RMW8

Squelch Control
Enter SQUELCH mode pressing the MENU key, the symbol with the current level value is displayed:
Number Squelch threshold
1 95,0 dB
2 91,7 dB
3 88,3 dB
4 85,0 dB
5 81,7 dB
6 78,3 dB
7 75,0 dB
8 71,7 dB
9 68,3 dB
10 65,0 dB
Select level using key UP and DOWN, confirm pressing with MEM key.
If the input signal is below the setting level, the receiver is muted, this function eliminates background noise during pause time. Ensure to set
such level to avoid to eliminate the signal.
Manual frequency selection
Pressing key UP / DOWN for select the channel ,
using MEM key for exit.

b) Transmitter WHL/WML

Ch/on
Press for one second to switch on the Transmitter. Transmitter displays the current frequency, the battery charge level. Press newly to pass in
a cyclic mode to the following functions: CHANNEL - PL - LOCK / UNLOCK. To disable the transmitter press and keep pressing for one
second.
Frequency selection
Enter CHANNEL mode pressing key CH/ON, CH symbol is displayed along with the current channel value. Using SELECT key to select
CHANNEL. Some seconds after the last key press, the display returns to the initial visualisation.
RF level Selection
Enter POWER mode pressing 3 times key CH/ON, Symbol PL and the current power value are displayed. Use SELECT key to select the
output power you need, 0 : the output power is 5dB,1 : the output power is 10dB, 2 : the output power is 15dB. Some seconds after the last
key press, the display comes back to the main menu.
Lock Function
Enter Look/unlock mode pressing 4 times CH/ON key, Symbol look or unlock ( considering the setting selected) are displayed , Using
SELECT key to select the setting (look/unlock). Some seconds after the last key press, the display return to the initial visualisation. When the
transmitter is blocked, it is possible to perform the functions scan. The display visualise the current setting without allowing the setting
modification: the sole available functions setting is: to power on, to switch off, to set MUTE and lock selection.
AUDIO MET ER dB
20
RF MET ER