Problem Solution Guide - (cont.)
Problem
cooling fan continues to run
after oven has been turned off.
time on display not correct.
cannot set clock.
Time flashes on display.
control panel does not "beep"
when pressing the keys on the
control panel and when the
timer runs down to zero.
error code appears and stays
on display, for example "u55."
Getting Help
before you request service:
1. review Before You Call For Service section of this manual (page 29).
2. use the helpful tips found in our Problem Solution Guide.
3. become familiar with the warranty terms and conditions of your product.
4. if none of these tips or suggestions resolves your problem, call our customer service center
at the number below.
Dacor's customer service center is available 6:00
for warranty repairs or questions and for Dacor Distinctive service (DDs) in the us and canada
phone: (800) 793-0093, extension 2822
for non-warranty repairs or questions in the us and canada
phone: (800) 793-0093, extension 2813
contact us through our web site at:
www.dacor.com/contact-us
Before You Call for Service
May Be Caused By
normal operation.
time of day not set.
power failure or power was turned
off.
oven in use. clock cannot be set
while oven is in use.
power failure or power was turned
off.
control panel tone ("beep") is set
to off.
an error code having a letter with
a number following it that appears
and stays on the display indicates
a problem that cannot be resolved
by the customer.
Warranty and Service
the cooling fan may run for a while after the
oven is turned off, until the internal parts have
cooled.
set time. see page 8.
reset time. see page 8.
turn off oven to set clock.
reset time. see page 8.
turn control panel tone ("beep") on. see page
8.
call for service.
– 5:00
Pacific Time
am
pm
30
What to Do