Selecting Display Mode; Controlling Monitor Quality - Eizo radiforce rx440 Setup Manual

Selecting Display Mode

This function allows easy selection of a desired mode according to monitor application.
Mode
1-DICOM
2-Custom
3-CAL1/4-CAL2/5-CAL3
6-Hybrid-γ
7-sRGB
8-Text
*1
9-ALT
*1 The items described above may not be displayed correctly depending on the usage environment. The quality of the
monitor cannot be managed using this mode.
Procedure
1. Press .
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
→ 1-DICOM←→2-Custom←→3-CAL1←→4-CAL2←→5-CAL3←→6-Hybrid-γ←→ 7-sRGB←→ 8-Text ←→ 9-ALT ←

Controlling Monitor Quality

The quality control software "RadiCS LE" (for Windows) is included with this monitor.
To calibrate the monitor and manage the calibration history, install RadiCS LE with reference to the RadiCS LE User's
Manual (on the CD-ROM). Use the RadiCS SelfQC function and built-in Integrated Front Sensor to perform periodic
calibration and Grayscale Check for the monitor independently. For details, refer to the User's Manual (on the CD-
ROM).
Attention
• Connect the monitor to the PC with a USB cable when using RadiCS LE.
Note
• To perform advanced quality control that conforms to medical standards, use the optional monitor quality control software
kit "RadiCS UX1".
Available to display in DICOM mode.
Available for the setting according to your preference.
Displays the screen adjusted by calibration software.
Automatically identifies the display area for the monochrome and
color images on the same screen, and displays each set status.
Suitable for color matching with sRGB compatible peripherals.
Suitable for displaying texts for word processing or spreadsheets.
Suitable for displaying the color with the brightness and grayscale
appropriate for the environmental illumination.
The mode menu
appears.
or while the mode menu is displayed.
√: Calibration is available.
Purpose
is pressed.
√
√
√
-
-
-
-
5