Specifications; Troubleshooting - Hyundai PDP 273 User Manual

P. Specifications
Compatible DISC:
Signal system:
Panel size:
Frequency response:
Video output:
Audio output:
Audio S/N:
Dynamic range:
Laser: Semiconductor Laser, Wave Length:
Power source:
Power consumption:
Operating temperature:
Weight :
Dimensions (W x D x H):
Battery Type:
Q. Troubleshooting
PROBLEM
No sound or Make sure your DVD is connected properly. Make sure
distorted sound all cables are securely inserted into the appropriate jacks.
Can't advance You can't advance through the opening credits and warning information that
through a movie appears at the beginning of movies because the disc is programmed to
prohibit that action.
The feature or action cannot be completed at this time
The icon ( )
because:
appears on
1. The disc's software restricts it.
screen
2. The disc's software doesn't support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You've requested a title or chapter number that is out of range.
Picture is ● The disc might be damaged. Try another disc.
distorted ● It is normal for some distortion to appear during forward or reverse scan.
No forward or ● Some discs have sections that prohibit rapid scanning or title and chapter
reverse scan
● If you try to skip through the warning information and credits at the beginning
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
SOLUTION
skip.
of a movie, you won't be able to. This part of the movie is often programmed
to prohibit skipping through it.
VCD/DVD/CD/MP3
PAL/NTSC
7 inch
20 Hz to 20 kHz
1 Vp-p/75 Ohm, unbalanced
1.4Vrms/10kOhm
Better than 80 dB
Better than 85 dB
650 nm/795 nm
DC 9-12V
10 W
5~40 C
0.791 kg
199.6 x 160.5 x 41.5mm
Li Polymer
EN - 72