Loading And Playing A Disc; Setup - Hyundai PDP 273 User Manual

1. Number buttons
2. Zoom(To zoom in/out picture)
3. Title
4. Audio

5. Setup

6. Enter
7. Previous/Next(when playing)  
Fast backward/FF
(when playing) 
Direction buttons
(when at menu setup) 
8. OSD
G. Loading and Playing a Disc
a. After connecting power to the unit, turn on DVD player with the ON/OFF switch. The power
indicator will light.
b. Open the disc tray by „OPEN" , and place a disc into the tray with the label side facing up.
c. Close the tray.The unit will load the disc and start playing.
d. Adjust picture quality by entering into video quality setup via SETUP button on the unit or from
the remote control.
e. To stop playing a disc, press STOP.
H. Setup
Press ‚SETUP' to display the Main screen of the Setup Menu on the screen.
Press ‚SETUP' again to exit the Setup Menu and the unit will resume its last playback mode.
1) Press SETUP , the ‚General Setup Page' will display on screen.
a). Select ‚Angle Mark' using the / button, and then press the  button to enter the submenu.
Choose Angle Mark on or off using the / button and then press OK to confirm the setting.
Press the  button to return.
* On: The screen will show the angle mark icon. (*If an angle option is available).
* Off: The screen will not display the Angle Mark
NOTE: Not all discs contain above features. The above features are disc dependent.
b) Select ‚Screen Saver' using the / button, and then press the  button to enter
the submenu. Choose Screen Saver on or off using the / button and then press OK
to confirm the setting. Press the  button to return.
* On: Enables screen saver
*NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if
the same image remain on the screen.
9. Play/Pause 
10. Stop ■
11. Slow
12. Subtitle
13. Menu
14. A-B
15. Angle
16. Repeat
17. Mute
18. Return
19. Volume + -
EN - 59
EN