Entering Programming Mode; Diagnostics - Viking RDDFF236 Service Manual

Diagnostics

entering programming Mode

1. Press and hold the "Door Alarm" keypad.
2. Within three seconds, press and hold freezer temperature "–" (down) keypad. Both keypads are now being
held in.
Press and Hold
3. While still holding the freezer temperature "–" (down), release the "DOOR ALARM" keypad and wait three
seconds.
Hold
4. When entered successfully, the freezer temperature screen will display PE.
P E
5. Entry is confirmed by pressing the freezer temperature "–" (down) keypad. The refrigerator temperature
screen will display a three digit number. These three numbers are the current programming code for this
unit. The example below shows code 010.
P E
Press
note: There is a decimal to the right of the last number. This will be explained later.
© 2012 Viking Preferred Service
Press and Hold
Hold
Release
0 1 0.
11