Water Dispenser - Viking RDDFF236 Service Manual

Service Diagnostics and procedures–Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.

Water Dispenser

To access the water dispenser:
1. Insert a screwdriver blade and carefully remove
the top cover of the dispenser.
Water Dispenser
2. Disconnect water line from dispenser assembly.
Water Line
© 2012 Viking Preferred Service
WARNING
3. Press tabs to release switch from side panel.
Screwdriver
Blade
4. Replace or repair as necessary.
5. Reverse procedure to reinstall.
Disconnect wiring.
Tabs
Wiring
34