Table of Contents
Advertisement
1. Tape the rudder to the vertical fin in the neutral
position as shown. This ensures the rudder is
straight when the tail wheel steering springs are
installed.
2. Gather the tail wheel parts shown below.
◊
1 - Aluminum tail wheel assembly
◊
3 - Tail wheel mounting screws
◊
1 - Steering tiller
◊
2 - Tiller mounting screws
◊
2 - Steering springs
TAIL WHEEL INSTALLATION
3. Place tail wheel steering tiller over the pre-
drilled holes in the bottom of the rudder.
4. Apply a drop of thick CA to the mounting
screws before inserting into the tiller mounting
holes.
33
Hide quick links:
Advertisement
Table of Contents
