Customizing Your Keypad - ADC Ultra-8/16 Operator's Manual

How to Answer an in-coming call
From time to time your installer may need to access the alarm from a remote PC to
make changes to your programming and for security reasons they may have configured
the alarm so that an authorized person on-site is required to make the alarm system
answer the in-coming call. This option is only available in CLIENT mode.
To answer an In-coming Call press <PROGRAM> <955> <ENTER>
Provided the line connected to the alarm was ringing at the time the panel will now
answer the call and allow a remote PC connection.

Customizing your Keypad

Local Edit Program mode assists the user to customize descriptions, adjust keypad light
and buzzer tone.
How to Enter Local Edit Program Mode to Describe Zones
To enter this mode, press simultaneously <CONTROL> and <ARM> for 2 seconds.
The display will show "Local Mode kb #". From hereon, you can change the numeric
description of a zone to a textual description.
Press <PROG> <1> to change the description of Zone 1. For example, Use the arrow
keys to move the cursor forward or backward on the display. Press the corresponding
key to replace the current digit. Each key represents 3 different characters. The first
character will be shown at the first press, etc. Press <MEM> to change from
uppercase to lowercase and visa-a-versa.
During the programming of text for all of the addresses 1-8,998,999 you can also use the
<A> button to return back to last saved text and you can use <B> button to return back
to the default text.
Press <ENTER> to save textual description.
For more zones, press <PROG>, followed by Zone # to continue textual description.
The functions of the alphanumeric keys are listed in Table 6.
Zone 1 <A..Z>
Bedroom
21