How To Read Trouble Messages - ADC Ultra-8/16 Operator's Manual

Message
Battery Low
Main Failure
Telephone Line Failure
Radio Device Battery Low
Supervise Detector
Failure
Zone Inactivity Time-out
Dialer Kiss-off Failure

How to Read Trouble Messages

Any failure or abnormal events that may occur are indicated by trouble messages, and
the Trouble indicator is lit. Press <MEMORY> to read out messages and other events
stored in memory.
Any failure or -abnormal events that may occur are indicated by trouble messages, and
the Trouble indicator is lit. Press <MEM> to read out messages and other events stored
in memory. Trouble messages are listed in Table 5.
Message
Zone Tamper
System Tamper
Pendant Panic
Panic
Fire
Medical
Duress code
used
Table 4: System Messages
Description/Action
The backup battery is low (charger or battery failure)
The main power is disconnected, or caused by power
outage.
The line is disconnected
Replace battery of the particular device
Radio detector failed to communicate
No movement detected during expected time in this zone
Communication fail
Table 5: Trouble Messages
Description/Action
The tamper of a particular zone
Main cabinet open
Panic alarm initiated via radio pendant
Panic alarm initiated via keyboard
Fire alarm initiated via keyboard
Medical alarm initiated via keyboard
Duress digit pressed by one of the users, under threat
16