Russound CAS44 Service Manual page 66

Factory Init Test
1. Connect 110VAC to the rear of the CAS44.
2. Connect a KP-LCD keypad to the CAS44 port number 1.
3. Press the power button on the Front Panel of the CAS44.
4. Press the on/off button on the KP-LCD.
5. The KP-LCD and CAS44 will turn on and illuminate to a Source.
6. Momentarily press the Setup button on the KP-LCD.
7. The KP-LCD will display "SrcNm".
8. Momentarily press the Setup button until FInit is displayed on the KP-LCD.
9. Press the power button on the KP-LCD.
10. The KP-LCD display will change to "SURE?".
11. Press the Volume Up button until the work "YES" is displayed.
12. Press the KP-LCD power button and "Please wait" will scroll on the display.
13. It will take approx 3 minutes the display to change to "Cycle".
14. Press the power button on the CAS44 to turn off the controller.
15. Press the power button on the CAS44 to turn on the controller.
16. Press the power button on the KP-LCD to ensure the controller powers on.
CAS44 Test Procedure
July 22, 2005
25 of 26
Setup
button