Table of Contents
Advertisement
240VAC Test
All tests prior to the 240VAC section were performed using 110VAC.
1.
Remove the 110VAC power cord from the rear of the CAA66.
2.
Set the AC110V / AC240V switch to AC240V located on the rear of the CAS44.
2.
Connect a 240 VAC source to the rear of the CAS44.
3.
Press the Power button on the Front Panel of the CAS44.
4.
Press the on/off button on the KP4.
5.
Press the Volume up button on the KP4.
6.
Volume should increase.
7.
Press the Volume down button the KP4.
8.
Volume should decrease.
9.
Turn off the CAS44 by pressing the Power button on the Front Panel.
10. Remove the 240 VAC power cord.
11. Set the AC110V / AC240V switch to AC110V located on the rear of the CAS44.
CAS44 Test Procedure
July 22, 2005
24 of 26
AC110V / AC240V switch
AC110V / AC240V switch
Hide quick links:
Advertisement
Table of Contents
