Waste Disposal - EINHELL Royal MT 26 Operating Instructions Manual

Anleitung MT 26_SPK1:Anleitung BHS 26_D
11. Disposal
Important.
The machine is made of several different materials
such as metal, liquids and plastics. Take any
defective components and fluids that are no longer in
use to special waste disposal points. Ask your dealer
or your local council.
12. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
13. Troubleshooting
Fault
The machine does not start. Correct starting procedure not
followed.
Sooted or damp spark plug.
Incorrect carburetor setting.
The machine starts but does not Incorrect choke lever setting.
develop its full output.
Soiled air filter.
Incorrect carburetor setting.
The engine does not run smoothly Incorrect electrode gap on the
spark plug.
Incorrect carburetor setting.
Engine smokes excessively Incorrect fuel mix.
Incorrect carburetor setting.
19.06.2007
Possible cause Troubleshooting
Follow the instructions for starting.
Clean the spark plug or replace it
with a new one.
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
Set choke lever to
Clean the air filter.
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
Clean the spark plug and adjust
the electrode gap or fit a new spark
plug.
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
Use the correct fuel mix (see fuel
mixing table).
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
10:42 Uhr Seite 21
GB
21