BLADE INSTALLATION
1-Before assembling and/or re-
placing the blade, make sure
that the robot has been
stopped in safety conditions
(see "Robot safety stop").
2-Turn the robot upside down
and put it down so not to ruin
the covering hood.
Important
Use protection gloves to avoid
the risk of cuts on hands.
3-Assemble the blade (A).
4-Tighten screws (B).
5-Adjust the cutting height (ee
"Adjusting the cutting height").
6-Capsize the robot in its functioning
position.
BATTERY INSTALLATION AND CONNECTION
The robot can be energized with
two lead batteries or with one or
two lithium batteries.
Install the batteries as shown.
1-Undo the knobs (A).
blade (A)
Recharging knobs (A)
- 23 -
screws (B)
IDM - 41501702900.tif
IDM - 41501701900.tif
User's manual
GB