AMBROGIO basic User Manual page 71

– Never tamper with, avoid, remove or
bypass installed safety devices. Such
actions could lead to serious risk to
personal health and safety.
– Keep the lawn mower in perfect oper-
ating conditions by performing the
maintenance procedures outlined by
the manufacturer. Good maintenance
guarantees better performance and
longer service life.
– Before maintenance and setting pro-
cedures are performed – also by the
user, if possessing the necessary
GB
technical skills – disconnect the pow-
er supply. The user must in any case
operate in full safety conditions, espe-
cially when working on the lower part
of the lawn mower, following the pro-
cedures as illustrated by the manu-
facturer.
– Use personal protections as recom-
mended by the manufacturer, espe-
cially the protective gloves when
handling blades and cutting discs.
SAFETY FOR MAN AND THE ENVIRONMENT DURING DISPOSAL
Do not dispose of pollutant materials in
the environment. Dispose of all such
materials in compliance with applica-
ble legislation.
With reference to the WEEE directive
(Waste of Electrical and Electronic
Equipment), during dismantling, the user
must separate the electrical and the
electronic components and dispose
them in the appropriate authorized col-
lection centres or give them back as they
are to the seller, when a new purchase is
made.
All the components, which must be sep-
arated and disposed of in a specific man-
ner, are marked with a special mark.
The unauthorized disposal of Waste of
Electrical and Electronic Equipment
(WEEE) is subject to fine according to
– Always remove the blade before re-
placing the batteries.
– In order not to irreversibly damage
electric and electronic parts, do not
wash the robot with water jets at a
high pressure and do not plunge it
partially or thoroughly in water, as it
is not watertight.
– The operators performing repair in-
terventions during the working life of
the robot must have technical exper-
tise, special abilities and experience,
acquired and acknowledged in this
specific sector. The lack of these re-
quirements may cause damage to the
safety and health of people.
– All operations, which must be carried
out in the recharge base (optional),
must be performed with the power
supply plug disconnected.
– Replace deteriorated parts with origi-
nals to ensure functionality and the
foreseen safety level.
sanctions regulated by the laws in force
in the territory where the infraction has
been verified.
As implementation of the European di-
rectives (2002/95/CE, 2002/96/CE,
2003/108/CE) in the Italian territory,
for example, a law decree (n. 151 dated
July 25 2005) has been enacted, thus
providing for an administrative fine of
€ 2000÷5000.
Danger - Attention
The Waste of Electrical and Electronic
Equipment may contain dangerous
substances with potentially harmful ef-
fects on the environment and on peo-
ple. It is recommended to correctly
dispose them.
- 10 -
User's manual