Chap.05 Description; Product Presentation - Jolly Mec Arte Acciaio Installation, Use And Maintenance Manual

CHAP.05 DESCRIPTION

05.1

PRODUCT PRESENTATION

Arte Acciaio
Arte Maiolica
Techna
WARNING
*Fully empty net container capacity is about 43 kg. The optional minimum level sensor indicates when pellets in
the container weigh less than 8 kg, for which the working capacity when the AL 23 – PELLET LEVEL alarm triggers,
indicating that pellet level has dropped under the minimum, is about 35 kg.
Jolly-Mec products are the result of over forty years experience in the wooden biomass
combustion sector; they are designed and engineered to meet the increasing demands of
today's markets with high performance levels and savings enveloped in a modern design.
The Heating stove, available in the 18 or 23 kW versions and approved according to European
EN 14785:2006 standards at a third party authority accredited by the European Commission
as a machine inspection and certification institute, is a high performance electronic controlled
closed circuit water heating machine with (only for the 23 kW version) or without hot water
production, powered with an ECOLOGIC AND ECONOMIC energy source: wooden pellets.
The Heating stove is a single-body heater with a heat exchanger in special steel, with a
particular flue gas pass and whose special structure allows it to make maximum use of the
heat produced by combustion to achieve high performance that places it at the top of its
category for efficiency and emissions. High yield, over 90%, and reduced polluting emissions
are the characteristics that allow this device to be included in the most advanced product
range on the market, permitting high energy savings and fast returns on initial investments
thanks to the excellent ratio between heating power and costs provided by an innovative
fuel such as pellets.
It works with forced draught, with a combustion fan for pellets and an 80 mm diameter
exhaust pipe located on the rear of the stove. Pellets are feed from the bottom, directly in
the basket through a double auger driven by gear motors.
The heating stove can be connected to a radiator or floor heating system. The heating stove
comes with a previously tested standard closed tank hydraulic kit.
Combustion is controlled by means of a radio-frequency electronic control unit with the
following main functions and features:
•
Remote control display
•
Chronothermostat
•
Room temperature
•
Power levels
•
Operating status
•
Multilingual
They are also fitted with:
• Pellet container with about 43 kg capacity and optional minimum level sensor*
• A practical drawer to collect the ashes.
• Heat safety device against any structural or water overheating
• Safety device against possible clogging of the flue pipe
• Fume exhaust fan
• Electrical resistance to ignite combustion and pellets
• Water circulator for the heating system
Ample LCD screen that provides an interface with the
product to set function values and read data on work
status.
On and off time setting function programmed with
settable temperature regulation program.
Actual room temperature settings and display function
Control possibilities on 5 heat power levels.
Function that displays product and connected heat
system operating status in real time.
Possibility to select one of five different European
languages (ITA - ENG - DEU - FRA - ESP).
13