Replacing the LCD Bezel
1. Place the bezel on top the LCD panel, and then press the bezel on all sides until it snaps
into place.
NOTE:
2. Secure the bezel with the two screws.
Table 3-26. Screws
LCD Bezel Assembly
Machine Maintenance
Downloaded from
www.Manualslib.com
NOTE:
Make sure that the LCD, camera, microphone, and antenna cables are properly routed
on the hinge sides and there is no gap between the bezel and the LCD cover.
Figure 1-98. LCD Bezel
Figure 1-99. LCD Bezel Screws
Step
manuals search engine
Screw
M2.5 × L4
Quantity
Screw Type
2
0
3-65