Table of Contents
Advertisement
4. Select option 2 (upper case ASCII code) and press Enter.
5. Write down the generated master password.
6. Reboot the computer.
7. In the HDD password prompt, type the master password generated in step 5, then press
Enter.
Removing the BIOS Passwords
To clear a lost BIOS password (user or supervisor password), you need to short the clear
password hardware gap (G2201) located on the mainboard. Refer to the
Passwords" on page
System Utilities
Downloaded from
www.Manualslib.com
5-7
section for detailed instructions.
Figure 2-14. G2201 Hardware Gap
manuals search engine
0
"Clearing the BIOS
2-15
Advertisement
Chapters
Table of Contents
