Page 44/82
Truss suspension
•
Connect truss hook VNT-TCBRK to "U" bracket by inserting 8x45 quick release pin in dedicated
holes;
•
Ensure truss hook is properly locked to "U" bracket;
•
Lift and position assembly, lock hook on truss suspension point and secure with hook cable.
Lock
Unlocking the "u" bracket safety locker
•
Lift the metal plate located at the corner of the bracket and unfold the side bar
PS S
ERIES HARDWARE SETUP PROCEDURE
PS SERIES HORIZONTAL SUSPENSION PROCEDURE
UNLOCKING „U" BRACKET SAFETY LOCKER
or