Nexo PS 8 User Manual page 3

SAFETY INSTRUCTIONS FOR NEXO TD CONTROLLERS
NEXO
NXAMP4x1
APPARATUS AND MUST BE EARTHED.
THE GREEN AND YELLOW WIRE OF THE MAINS CORD MUST ALWAYS BE CONNECTED TO AN
INSTALLATION SAFETY EARTH OR GROUND. THE EARTH IS ESSENTIAL FOR PERSONAL
SAFETY AS WELL AS THE CORRECT OPERATION OF THE SYSTEM, AND IS INTERNALLY
CONNECTED TO ALL EXPOSED METAL SURFACES.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet. (US market)
- Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
The lightning flash with arrowhead
WARNING: To reduce the risk of fire or electric shock,
symbol, within an equilateral triangle
do not expose this apparatus to rain or moisture.
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product's To avoid electrical shock, do not remove covers.
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
I
NTRODUCTION
ANALOGUE PSTDCONTROLLERS,
AND NXAMP4x4
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Dangerous voltages exist inside.
Refer all servicing to qualified personnel only.
NX242 DIGITAL
POWERED CONTROLLERS
maintenance (servicing) instructions
Page 3/82
CONTROLLER,
ARE CLASS 1
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
in the literature accompanying
the appliance.