Miele G 7782 CD Operating Instructions Manual page 23

Opening spring E-456
For MIS instruments which are sprung
to stay closed and cannot be taken
apart, scissors, forceps etc., and must
be held open in the wash jet sleeve.
Use the opening spring if appropriate.
MIS injector mobile unit E 450
Optics insert (not illustrated)
^ Only optics which are safeguarded
by the manufacturer against mechan-
ical damage may be processed in
special inserts such as the E-460 or
corresponding optic manufacturer's
inserts.
^ Assurance is needed from the manu-
facturer that optics and fiber optic
(cold-light) cables can be thermally
treated. Pre-treatment conditions
must be observed. DISIN VARIO
93°C-10 MIN or DISIN 93°C-10 MIN
process with de-ionized water final
rinse is recommended.
If you have any questions relating to
applications technology please contact
Miele's Professional Division:
USA 1-800-843-7231
products@mieleusa.com
CDN 1-800-565-6435
23