Optical Disc Drive Precautions; Shipping Preparation - HP EliteOne 800 G2 Hardware Reference Manual

Optical disc drive precautions

Be sure to observe the following guidelines while operating or cleaning the ODD.
● Do not move the drive during operation. This may cause it to malfunction during reading.
●
Avoid exposing the drive to sudden changes in temperature, as condensation may form inside the unit.
If the temperature suddenly changes while the drive is on, wait at least one hour before you turn off the
power. If you operate the unit immediately, it may malfunction while reading.
●
Avoid placing the drive in a location that is subject to high humidity, extreme temperatures, mechanical
vibration, or direct sunlight.
CAUTION: If any object or liquid falls into the drive, immediately unplug the computer and have it checked
by an authorized HP service provider.

Shipping preparation

Follow these suggestions when preparing to ship the computer:
1. Back up the HDD files on optical media or external USB drives. Be sure that the backup media is not
exposed to electrical or magnetic impulses while stored or in transit.
NOTE:
2. Remove and store all removable media.
3. Turn off the computer and external devices.
4. Disconnect the AC power cord from the AC outlet, then from the computer.
5. Disconnect the system components and external devices from their power sources, then from the
computer.
NOTE:
computer.
6. Pack the system components and external devices in their original packing boxes or similar packaging
with sufficient packing material to protect them.
The HDD locks automatically when the system power is turned off.
Be sure that all boards are seated properly and secured in the board slots before shipping the
Optical disc drive precautions 63