HP EliteOne 800 G2 Hardware Reference Manual page 50

14. To remove a memory module, press outward on the two latches on each side of the SODIMM (1), then
pull the SODIMM out of the socket (2).
15. To install a memory module, slide the SODIMM into the socket at approximately a 30° angle (1), then
press the SODIMM down (2) so that the latches lock it in place.
NOTE:
on the memory socket.
42 Chapter 3 Hardware repair and upgrade
A memory module can be installed in only one way. Match the notch on the module with the tab