Vertical Setup; Using The Laser Chalk Line - Makita SKR300 Service Manual

Flip the retractable foot. Place the instrument in vertical position, resting on this
foot. Use the adjustable feet to rough level the laser to adjust the top bubble vial
in order to achieve best accuracy for long distance.
Press the On/Off key to switch the laser on. It will start automatic levelling.
2c. Using the Laser Chalk Line
Hold the head and rotate the top cover (12) so
that the beam comes out the laser line
aperture (4). This gives a precise and stable
laser line for viewing at short distances. You
can move the line by rotating the head
manually or by using the remote control.
Note : The LDR180 detector will not work with
the chalk line
SKR300 (version 1-12-03)
2b. Vertical Setup
Page 10