Using The Scanning; Power - Makita SKR300 Service Manual

2d. Using the Scanning
Turn the laser on, press (SC) or
simultaneously (14),(17) to start scan.
Press (4) or (5), (14) or (15) to aim the
scan.
To adjust the scanning angle (10° to
48°), press (2) or (3), (17) or (16).
2e. Power
When the battery power is low, the laser head will stop rotating, the On/Off led
indicator (23) blink and then stay on.
Recharge battery pack or replace both alkaline batteries at the same time.
The SKR300 can be charged while working. If electricity is available on the job site,
simply plug in the charger and keep on working.
SKR300 (version 1-12-03)
(5)
14.
(2)
(3)
(4)
(SC)
17.
15.
16.
Page 11