Remove Pcb - Makita SKR300 Service Manual

3b. Remove PCB
a) Remove plastic sleeve (D27) to remove the X-axis assembly (D5 & D25)
b) Remove plastic sleeve (D27) to remove the Y-axis assembly (D19 & D25)
c) Unplug all the connectors by using a tweezers / small flat screw driver to unlock the inter-lock of connectors
d) Unlock and unplug keypad flat cable*
e) Remove 3 screws (D20) to release PCB
* NOTE : Twist the keypad flat cable a bit for easier plug back
Page 15
SKR300 (version 1-12-03)