Honda 08E91-E22-101B Installation Instructions Manual page 10

32. Secure the engine starter harness to the vehicle
harness using one wire tie.
ENGINE STARTER
HARNESS
33. Loosely secure the engine starter harness (at the
green tape) to the vehicle frame using one wire tie. If
another accessory is already installed, secure the
engine starter harness to the other accessory
harness.
WIRE
TIE
GREEN
TAPE
SQUARE HOLE
INSTRUMENT
PANEL
10 of 20
WIRE TIE
VEHICLE
HARNESS
With another
accessory harness
GREEN
WIRE
TAPE
TIE
ENGINE STARTER
HARNESS
34. Remove the 4-pin connector (if equipped) from the
vehicle 13-pin connector, and then remove the
13-pin connector from the connector holder on the
bottom of the fuse box.
832507BS
ENGINE STARTER
HARNESS 13-PIN
CONNECTORS
35. Unplug the 13-pin connectors, and plug the engine
starter harness 13-pin connectors into them.
36. Attach the engine starter harness to the bottom of
the fuse box, and attach the vehicle harness 13-pin
connector to the engine starter harness 13-pin
connector. If equipped, attach the 4-pin connector to
the side of the engine starter harness 13-pin
connector.
FUSE
BOX
VEHICLE 13-PIN
CONNECTOR
832508BS
AII 39870-40753 (0810)
VEHICLE 13-PIN
FUSE BOX
CONNECTORS
VEHICLE 4-PIN CONNECTOR
(if equipped)
ENGINE STARTER
HARNESS 13-PIN
CONNECTOR
13-PIN
CONNECTORS
Front View
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
832509BS
VEHICLE 4-PIN
CONNECTOR
(if equipped)