Honda 08E91-E22-101B Installation Instructions Manual page 19

11. The following message will display: The
registration of the Remote Control Engine
Starter Unit has been completed. Click the check
button.
"Registration" message
12. The following message will display: Check that the
engine can be started by the Transmitter. Click
the check button.
"Check that the engine can be started by
the Transmitter"
13. Perform the function test on page 20, then
disconnect the HDS.
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
CHECK BUTTON
752510AS
CHECK BUTTON
752511AS
AII 39870-40753 (0810)
19 of 20