Table of Contents
Advertisement
42. Plug the engine starter harness 28-pin connector
into the control unit, and mount the control unit to the
control unit bracket.
ENGINE STARTER
CONTROL UNIT
HARNESS 28-PIN
CONNECTOR
CONTROL UNIT
BRACKET
CLIP
HOLE
832515AS
43. Secure the clip on the 28-pin connector of the engine
starter harness to the hole in the control unit bracket.
44. Align the green tape on the engine starter harness
with the vehicle clip, and secure it to the vehicle
harness using one wire tie.
WIRE TIE
VEHICLE
CLIP
GREEN
TAPE
WIRE TIE
Temporarily
secure.
832516AS
45. Loosely attach the engine starter harness to the
vehicle harness using one wire tie.
46. Unplug the vehicle harness 6-pin connectors below
the ignition switch, and plug the engine starter
harness 6-pin connectors into them.
2 ENGINE STARTER
IGNITION
VEHICLE 6-PIN
HARNESS 6-PIN
SWITCH
CONNECTOR
CONNECTORS
47. Align the green tape on the engine starter harness
with the vehicle clip, and secure it to the vehicle
harness using two wire ties.
WIRE
TIE
GREEN
TAPE
ENGINE
STARTER
HARNESS
VEHICLE HARNESS
VEHICLE
CLIP
VEHICLE
HARNESS
ENGINE STARTER
Section View
HARNESS
Page 12
- Quick Links:
- Remote Engine Starter Registration
Hide quick links:
Advertisement
Table of Contents
