Table of Contents
Advertisement
4. Power Jack
The input power is DC 12V.
ONLY use package power adapter supplied with the internet. Other-
wise, the product may be damaged.
Note
5. MIC in (audio in)
Connect a microphone to the IP camera.
6. Line out (audio out)
Connect a loud speaker to the IP camera. This is for voice alerting and two-way
audio.
2.6.3 ICA-HM350 Installation
1. Fix IP camera to desired location with wall mount fixture.
2. Plug-in Ethernet Cable into RJ-45 connector Connect an Ethernet cable to the
LAN socket located on the IP Camera's back panel and attach it to the network.
3. Connect RS485 D+ and D- (if you need to control PT scanner).
4. Connect the attached power adapters to IP camera and heater/fan and plug-in
these adapters into power outlet.
a. If you don't need the heater/fan function, you don't need to connect the
power adapter to heater/fan.
b. The power adapter is unnecessary when internet camera is connected to a
PoE switch. Otherwise, the product may be damaged when internet camera is
connected to a PoE switch and power adapter simultaneously.
5. Done.
21
Advertisement
Table of Contents
