Table of Contents
Advertisement
2.2.2 ICA-H312 Physical Details
1. RJ-45 LAN socket: Connect to PC or Hub/Switch.
For connect to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This
Ethernet port built N-Way protocol can detect or negotiate the transmission speed
of the network automatically. Please use CAT-5 cable to connect the IP camera to a
100Mbps Fast Ethernet network switch or hub.
In the LAN socket, there are two LEDs embedded:
LAN LED (green color)
This LED will be flashing while network accessing via Ethernet.
Power LED (orange color)
This LED is used to indicate whether DC power is on or not.
Video in
MIC in
Line out
Camera Power Jack
RJ45
Reset Button
2. RS-485: Connect to a local keyboard controller.
DI/DO: Connect to sensor in and alarm out devices.
Cable for I/O connectors:
Name
DC 12V
GND
D+
D-
DI
DO
RS485 &
DI/DO
Cable Color
Brown/White
Blue/White
Purple/White
Gray
Green/White
Orange/White
Function
DC 12V (50mA maximum)
GND
RS485 data +
RS485 data -
Digital signal input
Digital signal output
7
Advertisement
Table of Contents
