Table of Contents
Advertisement
2. RS-485: Connect to a local keyboard controller.
DI/DO: Connect to sensor in and alarm out devices.
Name
DC 12V
GND
D+
D-
DI
DO
3. Local Video output
The IP camera also provides composite video output. User can use BNC video cable
to connect the IP camera with a TV monitor or VCR.
4. AC 24V in
The input power is AC 24V.
5. MIC in (audio in)
Connect a microphone input source to the IP camera.
6. Line out (audio out)
Connect a loud speaker to the IP camera. This function is for voice alerting and
two-way audio.
2.3.3 ICA-H651 Installation
Wall Mount
1. Disassemble the Outdoor Flange and dome housing with wrench. Mount the
dome housing as figure.
2. Mount the power box on a solid wall. Mount the wall bracket on the power box.
3. Fix the wall bracket to the outdoor flange with screws and wrench. Tighten the
screws as figure.
4. Connect all the cables as required.
10
Function
DC 12V (60mA maximum)
GND
RS485 data +
RS485 data -
Digital signal input (Digital In)
Digital signal output (Alarm Out)
Advertisement
Table of Contents
