Table of Contents
Advertisement
Restore the device:
a. Press the button down continuously.
b. Hold the button at least 5 seconds and release it. Then the device has been
restored to default settings and reboot again.
4. Power Jack
The input power is DC 12V.
1. Only use the power adapter supplied with internet camera
Otherwise, the product may be damaged.
2. The power adapter is unnecessary when internet camera is
connected to a PoE switch. Otherwise, the product may be
Note
damaged when internet camera is connected to a PoE switch
and power adapter simultaneously.
5. MIC in (audio in)
Connect a microphone to the IP camera.
6. Line out (audio out)
Connect a loud speaker to the IP camera. This is for voice alerting and two-way
audio.
2.4.3 ICA-HM130 Installation
1. Please select the most suitable position on the wall or ceiling to install the IP
camera.
2. Rotate the dome housing counterclockwise to remove it from the mounting base.
3. Set the mounting base onto the wall or ceiling and center it over the mounting
hole, using the two retaining screws for the main body, supplied by the appurte-
nance bag.
14
Advertisement
Table of Contents
