Advanced Configuration; Understanding Advanced Wireless Settings - NETGEAR WGPS606 Reference Manual

54 mbps wireless usb print server with 4-port switch

Hide thumbs Also See for WGPS606:

Table of Contents

This chapter describes how to configure the advanced features of your WGPS606. These features

can be found under the Setup heading in the main menu.

From the main menu of the browser interface, under the Setup heading, click Advanced Wireless

Settings to bring up this page.

Figure 5-1: Advanced Wireless Settings menu

The default advanced wireless settings usually work well. These settings should not be changed

unless you are sure it is necessary.

•

Enable wireless radio. If you disable the wireless radio, only devices that are directly

connected to the switch via an Ethernet cable can use the print server.

•

Mode. The default is g and b. You can change the mode to g or b only.

•

Power Saving: Generally this is best left off. Select the option you will use.

•

2.4 GHz Preamble: A long transmit preamble may provide a more reliable connection or

slightly longer range. A short transmit preamble gives better performance. The default is auto.

Advanced Configuration

202-10083-01

Chapter 5

5-1

Table of Contents

Wgps606 - 54 mbps wireless print server