NETGEAR WGPS606 Installation Manual

54 Mbps Wireless USB Print Server with 4-Port Switch WGPS606
These setup instructions assume that you will connect to an access point or
wireless router.
Note: See the installation instructions for your operating system before attaching
the USB cable to the USB Adapter and your computer.
Estimated Completion Time: 20 minutes for each printer; 10 minutes for each
computer.
Overview
When you finish the installation, your network will resemble this illustration.
Remove the NETGEAR CD.
What's on the CD?
• A setup wizard
• Software utilities you use for customizing your
print server
• The installation and reference guides
Note: Do not connect the Wireless USB Print Server until you are prompted to do
so by the wizard on the CD.
F Y
AMILIARIZE OURSELF WITH THE
P S .
RINT ERVER
:
• Notice that the bottom label has information such as:
• Port and connector descriptions and locations
• Login defaults
• Status lights
• To stand the unit up, attach its feet.
• Set the antenna vertically for best side-to-side coverage or horizontally for best
top-to-bottom coverage.
Set Up the Print Server First
1. I
NSERT THE
If the wizard screen does not appear, double click
autorun.exe on the CD.
2. U
SE THE
a. Click Set up a printer.
W USB
IRELESS
The Smart Wizard installation assistant opens the print server manager wizard.
b. Follow the on-screen instructions, and click Next when you are ready to proceed.
c. Follow the step-by-step instructions to complete setting up the printer with the
wireless USB print server.
Now, Set Up a PC
1. U
SE THE
a. Click Set up this PC.
NETGEAR CD.
S W .
MART IZARD TO SET UP A PRINTER
S W PC.
MART IZARD TO SET UP A