Table of Contents
Advertisement
7.
Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
Internal SD Card
Removing An Internal SD Card
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Turn off the system, including any attached peripherals, and disconnect the system from the
electrical outlet and peripherals.
2.
Open the system.
3.
Locate the SD card slot on the internal dual SD module and press inward on the card to release it
from the slot and remove the card.
4.
Close the system.
5.
Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
Installing An Internal SD Card
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: To use an SD card with your system, ensure that the internal SD card port is enabled in the
System Setup.
1.
Turn off the system, including any attached peripherals, and disconnect the system from the
electrical outlet and peripherals.
2.
Open the system.
3.
Locate the SD card connector on the internal dual SD module. With the label side facing up, insert
the contact-pin end of the card into the slot.
NOTE: The slot is keyed to ensure correct insertion of the card.
4.
Press the card into the card slot to lock it into place.
5.
Close the system.
6.
Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
Integrated Storage Controller Card
Your system includes a dedicated expansion-card slot on the system board for an integrated controller
card that provides the integrated storage subsystem for your system's internal hard drives. The controller
supports SAS and SATA hard drives and also enables you to set up the hard drives in RAID configurations
as supported by the version of the storage controller included with your system.
65
Advertisement
Table of Contents
Troubleshooting
